We have made a few adjustments to the corners.
The issue we had is with a 3ft radius and a 2 inch track center there is insurfishant clearance for 89′ cars and large steam loco’s etc. so we decided the track center on multiple tracks on curves should be at least 2-1/4 inches. but module end is still required to be 2′ inch track center.
This gave us a problem on the proposed double track sections planned on the new corners.
We decided it would be easier to make the new corners perminant 90′ degrees instead of 2x flexible 45′ degree corners.
This means Boards 3&4 and Boards 5&6 are now perminantly together as 90′ corners.
Both modules are single to double track on the opersite hands.
Corners 7 & 8 will single track very similar to corners 1 & 2. When they are built that will complete the 360′ degrees.
thats all for now!!!
Filed under: Blog Page
